Utah CDL Practice Test 2022
In Utah, drivers who operate vehicles are required to possess commercial driver licenses to transport passengers or property effectively and keep the highway safe. To be eligible for the Commercial Operator’s License, all drivers need to pass the knowledge and skills tests. Both of them may vary depending on the type of CDL and/ or endorsements you need.
Drivers should pay more attention and take time to learn more about these tests via “Utah Commercial Motor Vehicle Drivers Handbook” so as to hold a CDL successfully. Furthermore, heading over to our Utah CDL Practice Test is the most reliable way to access a free practice question bank and numerous flashcards. Let’s try it!
1. What to expect on the knowledge test?
You will have to take one or more knowledge tests, depending on what class of license and what endorsements you need. The CDL knowledge tests include:
- The general knowledge test: It is taken by all applicants.
- The passenger transport test (P): It is right for all bus driver applicants.
- The air brakes test: If you drive a vehicle that has air brakes including air over hydraulic brakes, you should take this test.
- The combination vehicles test: It is required if you want to drive combination vehicles.
- The hazardous materials test (H): The test is required for those who want to haul hazardous materials as defined in 49 CFR 383.5.
- The tank vehicle test (N): The test is required if you want to haul any liquid or gaseous materials in a tank or tanks which have an individual rated capacity of more than 119 gallons and an aggregate rated capacity of 1,000 gallons or more. Besides, the tank is either permanently or temporarily attached to the vehicle or chassis.
- The doubles/triples test (T): The test is required if you want to pull double or triple trailers.
- The School Bus test (S) If you want to drive a school bus, you are required to take the test.
2. What to expect on the skills test?
After passing the required knowledge test(s), you can take the CDL skills tests. There are three types of general skills that will be tested:
2.1. Vehicle inspection:
You will be assessed whether you know your vehicle is safe to drive or not. More specifically, you will be asked to do an vehicle inspection and explain to your examiner what you would inspect and why
2.2. Basic vehicle control:
In this part, you will be tested on moving your vehicle forward, backward, and turning it within a defined area marked with traffic lanes, cones, barriers, or something similar.
2.3. On-road driving:
You will be tested on your skill to safely drive your vehicle in a variety of traffic situations including left and right turns, intersections, railroad crossings, curves, up and down grades, single or multi-lane roads, streets, or highways. The examiner will tell you where to drive.
Bear in mind that you are required to take these tests in the type of vehicle for which you wish to be licensed.
3. When do you require to hold a Utah CDL?
You will need a CDL if you are operating any of the following vehicles:
- Any combination of vehicles with a gross combination weight rating (GCWR) of 26,001 or more pounds provided that the GVWR of the vehicle(s) being towed is in excess of 10,000 pounds.
- Any single vehicle with a GVWR over 26,0001 or more pounds, towing a vehicle not in excess of 10,000 lbs GVWR.
- A passenger vehicle designed to transport 16 or more people, including the driver.
- Any size vehicle carries hazardous material (Hazmat) placards, or a select agent or toxin listed in 42 CFR Part 73.
Contact your local department of driver licensing for more information.
4. What documents do you need to bring for your CDL?
When you apply for your CDL, you need to provide some documents as follows:
- A Certified Birth Certificate
- Valid Social Security Card (metal cards are not permitted)
- Proof of your Utah residence address.
- Proof of identity and legal/ lawful presence in Utah.
- U.S. Passport
- DOT medical card
- A Utah driver license with a minimum of 1-year experience.
- Other state’s driver license (if transferring from another state)
For more information on what you are required to bring, please visit the website at dld.utah.go
5. How much does the Utah CDL cost?
You can follow the Commercial Driver’s License Fees listed tabulatably below:
- Original or renewal for a commercial Class A, B, or C license or an original renewal of a provisional commercial Class A or B license for those who are over 21 years old will be $25.
- You will be charged a fee of $40 for your written test and $60 for your skills test.
- If you retake your CDL written test, you must pay a fee of $20.
- If you retest your CDL skills exam, you have to pay $40.
- If you want to get an original or renewal of a commercial driver license endorsement test (tanker, hazardous materials, passengers, school bus, DBL/TPL, hazmat & tanker), you must pay $7.
- If you want to reschedule your appointments for any reason, you must pay $25.
6. Why should you take the Utah CDL Practice Test?
If you only read the content of The Commercial Driver License Handbook without practice, you won’t take a wonderful chance to access the format of the actual test. Thus, let’s give our practice test a try. Because we built a system of practice tests and flashcards simulated the actual test to facilitate your preparation. More specifically, with an aim to increase your knowledge and memorizing skills, we divided the content into topics:
- Utah CDL General Knowledge practice test
- Utah CDL Air Brakes practice test
- Utah CDL Combination practice test
- Utah CDL Pre-trip Inspection practice test
and 5 endorsements:
- Utah CDL Tanker practice test
- Utah CDL Double And Triple-Trailer practice test
- Utah CDL HazMat practice test (Hazardous Materials)
- Utah CDL School Bus practice test
- Utah CDL Passenger practice test
You can take our Utah CDL Practice Test on our website or download it from the App Store or CH Play now for free! Let’s take it straightaway!